map of site
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Publications
- Category: Question answer (continued)
- Category: Wiring questions (continued)
- Stopped heating the underfloor when the sensor is working
- The junction box melts when the washing machine is turned on
- Selection of voltage relays and RCDs in the apartment
- Selection of the cross section of the cable and the introductory machine for the installation for blowing PET
- Supply of power cable to the bath from two points
- Connection of 3 power supplies to a running line
- Connecting household appliances in groups
- Connecting the hob and oven to one plug
- Connection of exhaust fan together with lighting to a single-key switch
- Connecting a difavtomat and RCD at the input in the metering panel - how to correctly
- Connecting a house to two power grids
- Connect the oven and the washing machine
- Connection of a channel fan to three timers for bathrooms
- Connecting the neutral wire when installing the difavtomatov
- Connection of single-phase equipment to the 380V junction box
- Connecting a transfer switch as usual
- Connecting a film underfloor heating to an outlet
- Connecting the outlet for the oven and induction hob
- Connecting a lamp from which there are 4 wires to two wires from the wall
- Connecting LED strip to dual switch
- Connecting LED strip shorter than one meter
- Connecting a twin outlet and switch after repair
- Meter connection after voltage relay
- Connecting a three-phase oven to the mains
- Connecting the sauna heater to a wire with a cross section of 1.5 mm2
- Electric stove connection from one phase to three
- Is an armored cable suitable for laying wiring underground if it is manufactured according to TU?
- Malfunction in the microphone due to power supply
- Help me choose a cable for connecting a business building
- Help me choose a magnetic starter for a three-phase motor
- Help identify the details on the board
- Help determine what is in the photo
- Help determine what is connected to the meter
- Help connect a power supply with an input voltage of 120V
- Help me deal with the two-key light switch
- Help me understand the marking of the cable cores of the warm floor
- Help solve the problem with the generator
- Help make a diagram of the distribution panel
- Help finding wires in the junction box
- The procedure for installing automatic machines and RCDs in the shield
- After replacing the lamp, the radio began to fade in the shower
- After replacing one outlet, the machine was knocked out and they generally stopped working
- After replacing the outlet, the smell of fused wires remains
- After replacing the electricity meter, the energy consumption doubled
- After a short circuit, the lamps flash and the sockets do not work
- After connecting two consumers to outlets, the third does not work
- After repairing the electric boiler, the outlet does not work, how to fix it?
- After the operation of the RCD, the electrician disconnected the neutral wire - is it dangerous?
- After installing the stabilizer, the light blinks when the load is connected
- After the plastering of the walls, the spotlight began to blink, will this pass?
- Advise the type of car wire
- Electricity consumption increased 5 times - what is the reason?
- Why is the bath and other appliances shocking after flooding the house?
- Why does one of the keys in the two-key switch not work separately?
- Why is there one copper-colored core in the VVG cable and one bronze one?
- Why does the voltage drop in the apartment?
- Why does the indicator show two phases in outlets in the bathroom?
- Why is there no phase in the outlet?
- Why does the outlet show a voltage of 50 volts and it sparks?
- Why is there 220V on the network, but 24V on the wires?
- Why is the stop button in front of the start button in magnetic starter circuits?
- Why is there a slight voltage on the part of the sockets?
- Why is the face value of the diflomat machine less than the value of the input machine?
- Why does the light in the house suddenly turn off?
- Why did the appliances suddenly burn out in the house and what should I do now?
- Why is there an overspending of electricity in a two-story house?
- Why does the 16A machine knock out when a heating cable is connected?
- Why does the machine knock out due to connected devices?
- Why does a 63A machine knock out at the input?
- Why is the machine knocked out on the stairs?
- Why does the machine knock out sockets in the apartment?
- Why does a machine knock out after mounting profiles for drywall?
- Why does the machine knock out when the washing machine is turned on?
- Why does the machine knock out when the iron is turned on?
- Why does the machine knock out when turned on?
- Why does the machine knock out when the LED strip is turned off?
- Why does the machine knock out when connected to the flashlights?
- Why does the circuit breaker knock out when turning on different electrical appliances?
- Why does an introductory RCD knock out when loading on sockets in the kitchen?
- Why does the introductory machine knock out at startup?
- Why does the introductory machine knock out during the operation of the boiler, but the group one does not work
- Why is the introductory automaton knocked out, not the group one?
- Why does the opening automaton knock out?
- Why knocks out a difavtomat at the input?
- Why does the difavtomat knock out when connecting the ground of the chandelier?
- Why is a warm floor diphtomat knocked out?
- Why is one phase out of three knocked out?
- Why does an RCD knock out on one of the groups, but if it is connected to all the groups, does it knock out?
- Why does an RCD knock out when the load is connected to the outlet?
- Why does an RCD knock out when a voltage stabilizer is connected?
- Why did I knock out the machine and after that the kettle does not work?
- Why does the line filter turn off when the load is turned on?
- Why does the switch not turn off the light when a key is pressed?
- Why is the turned off chandelier beating an electric shock?
- Why does one lamp go out when you turn on the second?
- Why is the machine heated and knocked out at 25A when turning on the heating elements?
- Why is the speaker coil heating up?
- Why are the housings and socles of energy-saving lamps heated?
- Why are the wires from the muffle furnace heated and what can be done?
- Why do devices buzz when plugged in?
- Category: Wiring questions (continued)
