One consumer, but it is desirable to have two phases. There is one single-phase counter, is it possible to put the second on a different phase? How to be with "0"?

Can a 30 kW diesel generator power a 5 kW electric motor through a switchboard, and give the remaining power to other consumers?

I am going to conduct a separate wiring to a small kitchen, I bought materials under the advice of sellers. Evaluate the kitchen wiring diagram, what is wrong.

The socket began to sparkle. I checked that the wires are connected correctly, but the voltage at the outlet shows 50 Volts. What is the reason and what to do?

Should the house lead, in addition to phase and zero, to the ground, if it is scanned along the pillars? Do you need a ground loop if the earth enters the house with an input cable?

What kind of power consumption should a welding semiautomatic device have, if I have 3 kW at home, so that by law and so that it can work?

The socket on the Titan is constantly melting, the house is old and, accordingly, the wiring is old. Maybe the matter is the length of the cable from titanium (it is three times as long as the standard)?

Oven with a capacity of 3.1 kW. Which cable lead to the shield from the outlet? Interested in the choice of cable cross-section.

I constantly see a video on YouTube where the wiring is carried out on the floor or on the ceiling. Are these some new rules? Or can it be done in the walls?

Is it possible to deploy a support to a pillar 90 degrees into the yard or 180 degrees into the neighboring yard? Is there a certain distance between the post and the support?

Where does the power cable go into the apartment and where is the power distribution box located at the entrance to the apartment? Three-room apartment, Brezhnevka, electric meter in the entrance.

From the support to the house, the wiring is aluminum at 28A, the machine on the meter at 16A. Will the 10 kW stabilizer work safely? The voltage sometimes drops to 130 V.