Question about RCD
Hello, there is a 50 A difavtomat in the shield and just a 50 A automaton, then a wire comes into the apartment, a 32 A 100 mA difavtomat immediately stands. Then it goes to the machines 10 A (light), 16 A (sockets), 25 A (stove) and 16 A (bathroom). After this, the last machine goes to the RCD 16 A 30 mA. From it care to the outlet (washer) in the bathroom, and light. What became embarrassing. 2.5 squares go to the outlet, but 1.5 squares to the light, stretch ceiling. As I understand it, if the light burns not just to shine but burn, then the wire will burn faster than the 16 A will work? Then put on a 10 A machine? But then the question is: will not cut down the machine? Washer A class! 50W LED light.
Or, in general, put immediately an RCD on the entire electrician after the difavtomat? But then how much Amperes to take UZO ???? Buying a new one is not a problem. And then put the light in the bathroom into the general light. Or is it necessary to put an automatic machine after a difavtomat, then only an RCD, and only then on all automatic machines?
Loading...
Confused with the concepts of RCD and difavtomat. Diff is an RCD + machine. If for some reason the overheating of the lighting wire occurs, the current necessary for this should exceed three to four times the nominal. So leave it as it is. If in another way the wire from the bathroom is not disconnected.
The fact is that I am not confused. see AB 50A - accounting - a 50A 100mA differential wire went to the apartment, it immediately went to a 32A 100mA differential machine, (as I understand it as a fire protection) Next, LIGHT 10A, sockets 16A, then a plate 25A and then AB 16A plus RCD 16A 30mA, they told me here which is essentially a diff 32A extra. And instead, put 50A 30mA uzo !! But in the bathroom instead of RCD 16A 30mA put 10mA.
Distribute the washing machine and sockets in the bathroom through one RCD 10 mA. Light a separate line from another machine. Dif on 32A leave in the circuit.