Why is the hob touch control unit heated?

There is heating in the area of ​​the touch control unit of the glass of the ceramic cooking surface of the crown on a non-working stove.

Ask your question Answer the question
Posted: Updated: 07.07.2017 3 comments
Loading...

3 comments

  • Admin
    07.24.2015 at 00:10

    Hello! The only reason for heating due to your fault is the incorrectly selected gap between the hob and the wall / oven. If you followed the manufacturer's recommendations during installation, it means that the reason for heating is incorrect operation of the hob. In this case, it is better to take it to a service center. Perhaps overheating is due to the same control unit.

    To answer
    • Semen
      07/31/2015 at 07:45

      Heating occurs when the hob is off and the oven is not working. I thought that the reason was in the touch control unit, I checked it in the service, but the heating did not disappear. When the mechanic took off the hob, I noticed that the control unit has a transformer and it’s apparently heating up, I haven’t found the reason, I’ve been using the panel for six years or earlier there was no heating if the panel did not de-energize. All the same, the touch control unit may not be working properly and I have not been properly defected. Isn’t it dangerous to operate with such a defect if the control unit malfunctions in half the trouble, and if there is a fire?

      To answer
      • Admin
        07/31/2015 at 10:45

        Hello! Well, in any case, heating is dangerous. Find a more reliable service center and have the hob re-diagnosed!

        To answer

Add a comment

Menu