Why is the Electrolux EWS 126510 W in the pump area?
When the Electrolux EWS 126510 W is switched on to any mode in the area of the drain pump, for some seconds there is some crackling and water starts to flow through the filter cover, although the cover is closed tightly. The filter is clean.
Loading...
Hello! Well, to begin with, check the condition of the pump impeller. Most likely, a crack because of her. Perhaps a coin or other small debris got into the pump compartment. If you did not find anything superfluous, try testing the drain pump by turning the machine on in the "drain" or "spin" mode. In this case, you must pull out the filter and highlight the flashlight to see how the impeller rotates. Most likely, you will immediately understand whether the pump is working or not. If the rotation of the impeller is uneven or accompanied by a crack, we recommend replacing the pump.