How to replace the cartridge in the chandelier?

Need to replace the cartridge. Unscrewed 2 fixing screws inside the chuck. And how to disconnect / connect the wire? Maybe there is a video?

Replacing the cartridge in the chandelier

Ask your question Answer the question
Posted: Updated: 16.11.2017 1 comment
Loading...

One comment

  • Admin
    10/14/2017 at 22:18

    After unscrewing the two screws, the cartridge is held on two wires that are connected to it. In order for the cartridge to be pulled, you need to disassemble the lamp in order to gain access to the contact connections inside it. If the wires are short, you will have to disconnect the two wires of this cartridge in order to get it. The cartridge itself can be mounted on bolted connections, but now this is rare. In most fixtures, the wires to the cartridge are simply welded or crimped under the rivet. If the wires are short and when they come out of the cartridge from the other end, then you can not put them back in, this must be taken into account - especially if the design of the chandelier is such that the wire from the cartridge goes through several tubes with bends.

    To answer

Add a comment

Menu