Is it possible to lay the cable with a cable from the outlet to the outlet?
Is it possible to lay a cable supplying sockets with a so-called loop? Those. from one distribution box we lay the cable to the first outlet and further.
Is it possible to lay a cable supplying sockets with a so-called loop? Those. from one distribution box we lay the cable to the first outlet and further.
The electric motor worked properly. Moved to a private house, connected 3 phases and ground. Can the motor overheat due to poor grounding?
If you connect the meter to an outlet in the apartment, will it be possible to measure how much the device consumes electricity (kWh)? Will he measure correctly?
Where can I connect the power to the machines and in general for wiring the second floor, the wire of which is routed to the second floor with a socket is suitable?
Hello! I am building a house with an area of 120 m2. I plan to be heated by an electric boiler. Tell me, do I need to connect 3 phases, or is it enough to have one?
How is burning the insulation of the power cable and what is it for. Installations for burning cable lines. Video example work.
Technical characteristics of the PUGNP wire. Explanation of the marking of the conductor and its scope. What is the danger of the PUGNP wire.
What is interfacial circuit and what are the causes of its occurrence. Methods of protection against phase-to-phase faults on a high-voltage power line.
Not sure why birds aren’t shocked by wires? The article reveals the reasons for the safe location of birds on power lines, as well as situations when the bird is shocked.
After connecting all the ground wires in the apartment, the phase disappeared completely (even if I disconnect the ground wire). What could be the reason?
There is a power supply for 100w, 26-36V, 2800mA LEDs and 5w, 6-7V and 700mA LEDs. Tell me, please, the connection diagram and the necessary materials.
There is a transformer TRDN-32000/220, how to properly depict it on the diagram? In the attached picture there is an option, what needs to be changed?
how to connect two exhaust fans (exactly the same - of the same brand, one manufacturer) - in parallel or in series?
The repair was done, but the wiring was not changed, the house was 1963, now there are problems with the switch and the socket. How to conduct new wiring without breaking the walls, is this possible?
A transistor 032N06N is punctured in a Makita screwdriver. What analogue can I replace it with?
Is it possible to connect an oven (3 kW; 3 * 2.5 copper; aut. 16A) and a hob (7.4 kW; 3 * 6 copper; aut 32A) for one UZO (40A, 0.03). Is such a scheme efficient?
If the switch is not clear enough, both the lamps connected to it and the separate lamp in the vestibule, which is connected to another switch, go out.
The readings on the total meter differ from the meters installed in individual rooms. What is the reason? Can the old meter wind up extra kilowatts?
Workers laid the cable straight parallel to the pipes, laying it on top. All this is sewn up in a box. Is it dangerous? Or is such a neighborhood possible?
What cable and automatic machines are better to use for connecting lighting for three rooms and electrical appliances (electric kettle, 2-burner electric stove, water heater)?
We recommend reading:
How to conduct electrical wiring in an apartment - all stages of electrical installation