Repair dishwasher Indesit IDL 40
Indesit IDL 40 dishwasher. Having installed any PM program after the “wash” operation, it goes directly to “drying”, and the indicator blinks very quickly, bypassing the “rinse”. As a result, PM does not rinse and dry; the water remains cold during washing. After checking the heating heater with a multimeter, the parameters are normal. Tell me, please, how to check the temperature sensor and what reason can be past these?
Loading...
Hello! Most likely it really is the case in the temperature sensor. Check its resistance with a multimeter. When the temperature sensor is heated, its resistance should decrease.
Hello! On an IDL 40 typewriter with 4 programs, the programs end with a fast blinking LED No. 4, I found a description - “Error in the NTC temperature sensor. The permissible time for heating water for washing has been exceeded (more than 40 minutes):
“The NTC temperature sensor does not have reliable mechanical contact with the machine tank or is not calibrated.” Tell me, please (if possible with a photo), where is this NTC sensor located on this machine? They write that it seems to be next to the ten, but I could not find it. 🙁
How to calibrate an NTC sensor?