Connection of two light switches for independent lamp control
There was a need to connect a switch with a lamp in the vestibule from the lighting switch in the corridor, so that the lamp control was independent. If you put the terminal couplers on the phase wires in the circuit breaker box in the corridor and from there, parallel to the corridor and vestibule switches, will it be right?
Loading...
Hello! Hello, you need to remove the phase from the junction box, the one that is BEFORE the switch and zero, and lay the cable to the lamp and switch in the vestibule. If you connect to the phase that goes from the switch in the corridor, then the lamp in the vestibule can be turned on only if the lamp in the corridor is turned on.