Why is not one LED light in the chandelier lit?

Chandelier for three horns. In all three, 7W LED lamps are screwed. In one of the three, the lamp is off. At the same time, replacing it with the same one, but LED 10W or energy-saving spiral everything is on normally. The cartridge is working. The base and the turns on the lamps are identical.

Ask your question Answer the question
Posted: Updated: 06.01.2019 2 comments
Loading...

2 comments

  • Admin
    01/06/2019 at 00:05

    Hello! Have you tried to screw other LED lamps into this lampholder? Try to bend the tabs in the cartridge (but do not short-circuit them, turn off the power, or even better, turn off the machine at the input). This usually helps. Even when in appearance identical to the cap, there may be some difference
    And the same 7 W lamp must be checked whether it is working at all?

    To answer
  • Stepan
    01/06/2019 at 00:23

    Thank you for your prompt reply. I tried different 7W lamps. Does not work. Any more powerful shines. About the reeds in the cartridge, perhaps the most practical advice. Thanks again.

    To answer

Add a comment

Menu