Why did LED lamps burn out quickly?

Andrew asks:
Because of this, LED smdGX-7W-840-GX53 bulbs can burn out without having worked out the set time according to the instructions. We worked only a third of the prescribed, shelf life is the norm. First, one began to blink, then the second burned and cracked with a small glow, and then within 6 months all 6 burned out (stretch ceiling) I'm afraid that the master did the wrong wiring. What should I do?
The answer to the question:
It is unlikely that the wiring is if the wiring is new. Check the voltage in your apartment, LED and energy-saving lamps do not like both low and high voltage.

Moreover, take measurements in the morning, in the afternoon, in the evening ... It is also possible that you are taking place. This can be if there are powerful consumers of electricity or production nearby. The third reason is overheating. if the lamps were used in closed shades - their service life is usually reduced. But this is hardly your option, because you write that in the suspended ceiling there is also a GX53 base, then I believe that these are spotlights with or without an open ceiling ...

Perhaps the only thing that could be out of the wiring problems is either a bad contact somewhere or a bad and sparkling switch. This results in power surges.

I recommend reading this article. https://our.electricianexp.com/en/prichiny-chastogo-peregoraniya-svetodiodnyx-lamp.html.

I also recommend buying a protection unit for LED lamps, in case of power surges, for example, Granite BZ-300-L

Loading...

Add a comment