Gefest 45301 dishwasher shuts down
Hello, we bought a Gefest 45301 dishwasher and the first time the indicator lights up, the economic mode indicator lights up. We chose a different program, but after 20 minutes of operation the machine would beep 3 times and again switch to the economic regime, and so on several times. They tried to pull it out of the network, but after switching on everything repeated. What could be the problem? Does this mean that the machine is not working? Or are we doing something wrong? They took it under warranty for repair, yesterday they took the dishwasher out of the repair, the examination certificate says that the machine is working properly, but as soon as we connected it at home the whole situation repeated: I turn on the main program, the machine starts to wash, but after some then it switches to the economy mode (the corresponding ECO LED blinks) and the whole machine doesn’t really work, the dishes are wet and with detergent stains. The last time the detergent compartment didn’t open at all, in fact the machine didn’t do anything! What could still be the problem? It’s just a pity that we threw 22 thousand into the wind (((
Loading...
Hello! If the service center said that it was working, then you may have problems with water pressure, low voltage or incorrect connection of the dishwasher. Have you rechecked all these points?
the voltage really jumps with us, but is it really so sensitive to voltage? The water pressure is wonderful. But what about the connection, my husband said everything was right, they looked on the Internet how to connect correctly. If we have a bad voltage, then you have to buy a stabilizer? there is such an Aqua-Stop box, does it matter how to install it up, sideways or upside down?
Yes, the stabilizer will help to solve the voltage problem, if the matter is really low voltage. The location of the aqua-stop is not fundamentally important, however, in the instructions, the manufacturer can give his recommendation on this matter.
sometimes it doesn’t even wash the rinse out for 13 minutes, tried it 6 times yesterday, it washes exactly 10 minutes, it has 3 minutes left and it beeps 3 times and turns off. water stands at the bottom. does not produce any errors.
And how much water is there at the bottom? Maybe there are problems with the water level sensor, is the dishwasher behaving inappropriately?
even the water filter is closed
the filter is closed with water. And if there is a problem with the wadi sensor, how can this be determined? Or is it determined only by specialists
right now, the complete cycle of washing in economic mode was 2.48. the voltage in the network was 200 centuries and yesterday we had 180-190 centuries.
At least a multimeter should be at hand to check electrical contact.In addition, you need to visually inspect for blockages in the hose and the sensor itself. You also need to purge the hose and at this time listen if there is a click in the water level sensor. Watch the video on YouTube, there are many articles on the Internet on how to check the water level sensor of a dishwasher.
Thank you. We will definitely see. It’s just a pity. It’s only a month today, and it’s with us probably only five times washed, and the rest of the time it’s buggy.
and last night I put it on a delayed start, so after 20 minutes it again signaled and again switched to ECO
It was necessary to immediately take the money, while 2 weeks according to the law was.
we bought it, but did not immediately check it and didn’t install it, because the headsets were assembled, and when it was installed it was already 17 days from the date of purchase