Error C40 hob Hotpoint-Ariston KIA 640 C

Good afternoon! Hob hotpoint-ariston kia 640c. When the stove is connected to the network, it gives an error c40 and the panel does not work. What does this code mean?

Ask your question Answer the question
Posted: Updated: 16.11.2017 14 comments
Loading...

14 comments

  • Admin
    07/11/2017 at 18:09

    We did not find such a code in the operating instructions for this hob, so we find it difficult to answer. Have you accidentally mixed up a letter or number?

    To answer
  • Ilya
    07/13/2017 at 13:11

    Good afternoon! Yesterday I handed over for repair, today they called and said that everything works for them. They suggested that this is possible due to the fact that small power is allocated to the apartment (5 kW) and at the time of start the stove determines this and does not start. I want to hear your opinion, is this possible?

    To answer
    • Admin
      07/13/2017 at 13:15

      I wonder how this plate determines the power allocated to the apartment, reads the rating of the circuit breaker? :) Maybe you didn’t understand something. Maybe the matter is the voltage in the network, and not you allocated power?

      To answer
  • Ilya
    07/13/2017 at 13:27

    No, the master spoke specifically about power, about 5 kW, etc.
    With voltage, everything is fine, because at the entrance to the apartment there is an ultrasound scan. And when the stove did not work, I immediately checked the voltage showed 230V.
    Cheat mean?

    To answer
    • Admin
      07/13/2017 at 16:17

      Apparently yes. Let them demonstrate the operation of the hob in their company.

      To answer
    • Nail
      09/07/2017 at 15:36

      What is the result with the stove? What was the reason? I have the same plate, and also C 70 error, there is no such error code in the manual (

      To answer
  • Alexander
    10/01/2017 at 20:32

    The hotpoint-ariston 7HKRC 640 worked perfectly for lunch. It was necessary to disconnect from the outlet. An hour after turning on, the stove gives Lo (apparently an error code) and no function is turned on. What is the problem?

    To answer
    • Admin
      10/02/2017 at 09:29

      For some hobs, the Lo means that the child lock mode is on, in which no buttons work. Try disabling this mode if you have one.

      To answer
  • Andrew
    10.28.2017 at 18:35

    Can I connect a Hotpoint-Ariston IKIA 640 C to two phases?

    To answer
  • cepzik
    01/07/2018 at 16:09

    I blinked C82 on the kia 641. I didn’t have that in the instructions either. will you help?

    To answer

Add a comment

Menu