Two phases were applied to the single-phase meter Energomera CE-101 - what now to do?
In the outlet after the counter 400 volts. I understand that instead of the neutral wire they connected another phase. As a result, I have on the counter instead of a linear 220 V, phase. Question: what will happen to the counter? It will be serviceable or under replacement. The vacuum cleaner burned. I measured the voltage and figured out such a picture. New counter in the garage. The wires on the pole were connected by the electricians of the energy sales company after I went through all the established steps and procedures. Question 1 - Did the counter burn out? Question 2. What should I do right?
You understand correctly - they connected the second phase instead of zero. Only 220 is phase. Linear is 380 (400) volts. In general, an electronic meter can survive, it needs to be checked. The electromechanical should burn out immediately.
As I understand it, the electricians plugged in and left, and later you saw that there was 400 volts in the socket, hence the question: is it showing something now, is it lit?
In general, in this case, you should not buy a new one, let the energy company compensate for the damage. This was the fault of the staff. But such a question will most likely have to be resolved through a court.
As I understand it, the electricians plugged in and left, and later you saw that there was 400 volts in the socket, hence the question: is it showing something now, is it lit?
In general, in this case, you should not buy a new one, let the energy company compensate for the damage. This was the fault of the staff. But such a question will most likely have to be resolved through a court.
Loading...