Can the appliance fail after a power surge?
There was a power surge, everything turned off and immediately turned on What could be the consequences? I’m very worried, I already felt the consequences once, what should I do?
There was a power surge, everything turned off and immediately turned on What could be the consequences? I’m very worried, I already felt the consequences once, what should I do?
After mounting the wiring and finishing the finish finishes differential machine. Is it possible to connect this core to a neutral wire instead of grounding?
The fuse in the starter relay circuit (retractor) is blown. Maybe there is a problem in it? Or in a relay controller? I enclose the scheme.
Will there be energy savings if you connect the boiler through a 220-24V power supply and a 24-220V inverter? How to connect it?
In the junction box, wires from the outlet, lamp and switch. I can not navigate how to switch from a power outlet to a switch. Can you explain?
The two-key switch displays 2 terminals for backlight, how to connect it correctly so that the backlight works?
You need to connect the 0.75 sq. Mm copper wires with the 0.5 sq. Mm aluminum connector for the LED strip. The voltage is 12V. Can this be twisted?
What is a servo drive and where is it used. Advantages and disadvantages of the mechanism. How servos for heating and radio-controlled models work and are arranged.
Is it possible to connect a three-phase ventilation motor without a start button and magnetic starters directly to a three-pole circuit breaker?
After a power surge, the Harvia C105 sauna control unit does not turn on. After replacing the fuses, nothing has changed, what should I do?
What is motor vibration and why does it occur. In which GOSTs and other documents the norm is indicated. What are the ways to measure and eliminate vibrations.
The status of GOST 12.1.030-81 for 2019. Occupational safety standards system. Electrical safety. Protective grounding, grounding.Download GOST 12.1.030-81 in PDF.
Check the circuit of the electrical panel, namely, the correct choice of circuit breakers and its layout. Is it possible to lay several cables in one corrugation?
Is it possible to replace an electric meter with parameters 5-7.5A with a more powerful one - 5-10A? What do these parameters mean and what do they affect?
Which wire to use to replace wiring in a car trailer? What are intended for laying in cars? Is it possible to use PVA and ball screws?
The apartment is on the ground floor, in the basement is the ASU of the house. Is such a neighborhood dangerous in terms of electromagnetic radiation?
There are two chandeliers in different rooms and a two-key Aqara switch. Tell me the correct connection diagram for it.
He made a diagram of the electrical panel. Help me choose the values of the machines? Is the wiring diagram correct? How to connect an RCD? Is it possible to connect zeros after an RCD?
Tell me, is it possible to connect sockets to an electrical panel with a 25A automatic machine? Now connected electric boilers that consume 20A.
I make a toy for my son with my own hands, I bought LEDs and I want to connect them to a 12V voltage. How to choose a resistor? Is 470 ohms enough?
In the switchboard there are 3 automatic machines of 16A each. Machine with what rated current can be set common to them? Or is it better to put a load switch?
There is a switch with Wi-Fi, designed to connect a chandelier with a fan. But I can’t get it working when I connect only a chandelier.
The status of GOST 12.1.051-90 for 2019. SSBT. Electrical safety. Safety distances in the security zone of power lines with voltages above 1000 V.
There are two outlets. A boiler is connected to one, and suddenly we want to connect a refrigerator and a washing machine. Can this be done if I buy a 16A extension cable?
We recommend reading:
How to conduct electrical wiring in an apartment - all stages of electrical installation