Which voltage stabilizer to choose in the metering unit of thermal energy?
Advise you to choose a voltage stabilizer in an apartment building (about 200 apartments) to stabilize the voltage on a common house heat sensor (meter).
Advise you to choose a voltage stabilizer in an apartment building (about 200 apartments) to stabilize the voltage on a common house heat sensor (meter).
There is an alarm, after turning it on, when activated, a light should light up along with the sound, but it blinks, and does not constantly light. What is the reason?
He spent the wiring old and new, connected with ordinary white connectors. After puttying, it bursts and the light does not go out. To leave? Will it dry out?
What is an existing electrical installation in accordance with the rules of PTEEP and MPBEE. Definition of the concept and examples of the correct answer to the question in different situations.
Is it possible to connect an SPD protection device (SPD), only to phase and zero, after a circuit breaker at the entrance to the house? There is no grounding in the house.
How to connect the ABB AT3-R timer and the RT-820M temperature relay with the pool circulation pump so that the pump switches on in time and when the water temperature drops.
When 2 heat guns are plugged into the outlet, an automaton that stands on a support is knocked out, and not an ABB S201 C16 submachine gun is connected in a separate group. What should be done?
We screw 5 bulbs of 40 watts into the chandelier. After some time, the machines turn off. What could be the problem? Or is it a lamp feature? Already the second chandelier is so.
How to connect a fluorescent lamp without inductor and starter. A review of existing switching schemes, as well as videos that clearly show the process.
There is one exit from the wall (3 wires), which are used to connect the oven. Is it possible to connect an oven, a refrigerator and a cooking tap from this output?
How to connect a subwoofer to a car. I do not have 2 * 3 chips, can I connect without it? There is an acoustic cable, remote cable, battery cable, ground.
I connected the lamp directly to the network, the light began to flash, and very much, In other rooms I connect - everything is fine. What is the reason for the lamp blinking?
Three wires come to a four-pin socket. The indicator shows the phase; it does not light up on the other wires. How to connect a three-pin socket now?
Is it possible to put a voltage relay UZM-51m 63A on an apartment, where the input circuit breaker is 25A? If not, then which one? Thanks in advance!
The main difference between a transformer and an autotransformer. What is the difference between these two devices. Comparison of the principle of operation, design and scope.
After the complete repair (the builders were engaged), I discovered that one outlet did not work. Maybe the builders killed that? Where to look for a malfunction and what to do?
What materials are needed for electrical work in an apartment and a house. List of minimum consumables and protective devices for electrical installation.
The status of GOST 2.755-87 for 2018. Graphical symbols in electrical circuits. Devices switching and contact connections. Download the document in PDF.
We recommend reading:
How to conduct electrical wiring in an apartment - all stages of electrical installation